1、Production processes of chanel bags
2, open Paper
Open paper is based on painting to produce a good design model, will carefully design a model extension in the paper, such as encountered in symmetrical components, such as fan, wall sub, bag cover and package at the end, just draw the half of the profile, Then, the symmetry axis with an awl or other apparatus acuminate scratches, and along the symmetry axis of the fold to complete the other half of the production parts will be cut off next. As the package body surface of the fat-shaped surface, and therefore requires a surface launched paperboard, and life started in a similar cylindrical surface. Expand the surface of an object is to curve the surface of the shape and size according to the actual launch into a plane.
3, open material
Open replica bags production materials is in the process of the first process, is expected to open a direct impact on the quality of the product quality and product costs. Therefore, the open-cut is one of the more technical processes. The steps followed by cutting etching, polishing, waxing, punching, molding, punching, cutting, assembly, forming, molding, bending, hot pressing
1, sampling: the leather Tan Fang on the table, checking the quality of hides, the disabled and the location where the possibility of using the situation, according to the quality of sub-files.
2, nesting: nesting, generally, in the first row of fan, wall sub, plug, package cover and other major fabric, and then row of small material and minor component materials.
3, designated sample: hides selected after examination, the leaflets leather tiles on the table, the required model laid out and check the skin surface so that the disabled can use and hide.
4, the CD like I: There are two kinds of methods are generally one is cutting with scissors, and the other is designated a knife cut.
4, table
Craft table is divided into four main categories:
1, chip cutting process: on-chip cut is the product parts and components according to technical requirements so that the edge piece whittled certain specifications, and thus the next working procedure for processing the request. We must do to make parts and components at the junctions, folding Department, the pressure at level ö clothes, tidy, beautiful, to avoid zero, components seams, hem, press ö parts too thick, affect product quality and appearance.
2, part of the modification of the edge and inlaid pick: the modification of the edge components with inlaid access technology used in the luggage a wide range of products. Edge of the modification and then inserts the edge in on-chip process is conducted on the basis. At the same time, it is also stitched basis. Edge of the modification usually dyed edge, fold, trim, sewing machine, stitch side and so on.
3, adhesive technology: Adhesive technology is to refers to the fabric or the liner and the cabinet into one through the adhesive bonding process. Bonding process can be divided into three-dimensional pieces and flat pieces of adhesive bonding of two types.
4, basic sewing technique: suture connecting the product and to zero, the primary means of components. Through the suture can the scattered parts and components assembled into a complete product, sewing bag product operation process is a major part of the process.
5, after Tao
Products have been processed each step of production, most likely the formation of stains in the production process, need to be dirty, wipe clean, but also because of modeling and design requirements, but also a series of modification of the product collation. These include: cleaning, shaping, maintenance, and fill disability, the school equipped with metal fittings, treated with preservatives. Most of the replica handbags had packed into a finished product. |
