|
 
|
Your replica rolex models know? Because there are many models Speedmaster specific dial features are not the same. If the circumstances are different can be the message to me.
I tried to get an estimate of, your table is not the 6:00 bit 9:00 bit 12-point bit small dial, there is a yes 3:06 Dian 9 o'clock position of the small dial.
No matter how a similar product, you are blocks of time table, you should figure out a time table of the basic functions. Do not know what you said second hand is not a big needle go tick tick Flanagan? In fact, this is not a second hand This is the timing pin.
For you to talk about the function of the three buttons bar, you may know how the story.
When you need a time when the first three buttons pressed a button on the needle started to go, and then activated if this needle will stop.
This is where the first three buttons feature a button to control the timing pin.
The second button does not say, is that you winding and adjusting the clock minute hand use.
The third button is used to do timing pin zero, regardless of the time you reached the 10-pin position, or 6 o'clock positions are you press stop, then press the third button, this needle will go to 12 o'clock position . Is no connection with the second hand.
Under the first test you can press the first button you see a needle has to go to stay on.
So where does the second hand authentic? You are in your 3 small dial on the look, it should have been able to find a lap to go in changing this one small needle, which needle is 60 seconds walk around the laws. This is the second mens watches.
Your table 3 should have a small dial is a 30 lap 12 lap. Their functions are 30-minute timed 12-hour time, Flanagan's largest timing that you did not pin the rounds in 30 minutes, a small dial inside the needle will go a grid. When the turn of the two laps for 30 minutes then the 12 hours it will take a small dial grid. So you can know that you are starting from the time the number of hours now after the exact time of |
|
